Clock/Timer
ECO POWER
STANDBY - ON
iR
USB DIRECT
ALBUM / PRESET
TUNING
TIMER SET
SOURCE
PROGRAM
Clock setting
1
In standby mode, press and hold CLOCK SET.
➜
SET CLOCK is displayed briefly. Then, clock
digits for the hours flash.
2
Adjust VOLUME to set the hours.
3
Press CLOCK SET again.
➜
The clock digits for the minutes flash.
4
Adjust VOLUME to set the minutes.
5
Press CLOCK SET to confirm the time.
Timer setting
●
The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time (one time operation). The clock
time needs to be set first before the timer can
be used.
●
You can also use it to record a favourite tuner
programme at a set period (refer to "Recording
timer")
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press TIMER SET 3 for more
than two seconds.
2
Press SOURCE repeatedly to select the sound
source.
➜
"SET TIME" and "SELECT SOURCE" are
displayed.
20
BAND
RECORD
DISPLAY
CLOCK SET
M C M 7 2 0 M I C R O S Y S T E M
VOLUME
DSC
DBB
INCREDIBLE
SURROUND
3
Press TIMER SET 3 to confirm your desired
mode.
➜
"SET ON TIME" is displayed and the clock
digits for the hours flash.
4
Adjust VOLUME to set the hours.
5
Press TIMER SET 3 again.
➜
The clock digits for the minutes flash.
6
Adjust VOLUME to set the minutes.
7
Press TIMER SET 3 to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating timer
●
In standby or during playback, press TIMER
SET 3 (TIMER on the remote control)
once.
➜
Display shows
deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1
Press SLEEP on the remote control repeatedly
to select a preset time.
➜
The selections are as follows (time in
minutes):
60 ™ 45
45 ™ 30
30 ™ 15
60
60
60
60
45
45
45
30
30
30
➜
"SLEEP XX" or "0" is displayed. "XX" is the
time in minutes.
2
When you reach the desired length of time, stop
pressing the SLEEP button.
To deactivate the sleep timer
●
Press SLEEP repeatedly until "0" is displayed, or
press Eco Power/STANDBY ON y.
if activated, and disappears if
15 ™ 0 0 0 0 0 ™ 60
60 ...
15
15
15
60
60
60