Table of Contents
Advertisement
Radio Reception
STANDBY-ON
SOURCE
BAND
Tuning to radio stations
1
Select TUNER source.
➜
is displayed.
TUNER
2
Press BAND (TUNER on the remote
control) once or more to select your waveband.
3
Turn TUNING 0 to tune to a station.
➜
Display shows: the frequency of the tuned
station.
Maintenance
Cleaning the Cabinet
●
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
●
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out.
●
Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic
spray intended for analogue records.
-
+
PROG/CLOCK
VOLUME
TUNING
Other Connection
Helpful hints:
To improve radio reception:
– For FM, extend coil antenna at the back of the
unit fully for optimum reception.
Listening to an external source
You can listen to the sound of the connected
external device through your system's speakers.
1
Select AUX source.
2
Use a line-in cable (not supplied) to connect
MCM 108's AUX-IN jack (3.5 mm ) to an
AUDIO OUT or headphone jack on an
external equipment (such as CD player, or VCR).
Cleaning the disc lens
●
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
9
Advertisement
Table of Contents
