For Prevention Of Water Leakage Accidents - Olympus CWPC-02 Instruction Manual

For Prevention of Water Leakage Accidents

When water leakage occurs while this product is being used, the
camera inside may be irreparably damaged. To avoid this, please
take the following precautions.
1. When sealing this product, make sure that there are no hairs,
fibers, sand particles or other foreign matter adhering to the
waterproof packing or the surface that comes in contact with the
packing. Even a single hair or a single grain of sand may cause
water leakage. Please take extra care when checking.
<Examples of foreign matter sticking to the waterproof packing>
Hair
2. The speed at which the waterproof packing deteriorates depends
on usage and storage conditions. If the waterproof packing is
damaged, shows cracks, or has lost its elasticity, leakage may
result.
3. This product has an airtight plastic (polycarbonate) construction. Its
water resistant properties may be affected if it is deformed by
exposure to high temperatures for a long period (for example, if it is
left in an automobile, on a boat, or at the beach), or subjection to
uneven external force for a long time. Also, do not place heavy
objects on this product during storage or transport.
4. When the surface in contact with the waterproof packing is pressed
strongly from the outside of the product, or when the product is
twisted, the water resistant function may be lost. Take care not to
exert excessive force.
5. Before using this product, perform the preliminary test and the final
check.
6. If you notice drops of water or other signs of water leakage while
taking pictures, stop shooting immediately, remove any water from
the camera and the product, and perform the tests in "Final check"
to determine whether leakage has occurred or not.
Fibers
E-5
Grains of sand