Table of Contents
Advertisement
CD
Selecting and searching
Selecting a different track
●
Press 4 / ¢ once or repeatedly until the
desired track number appears in the display.
➜
MP3/WMA:
Track information scrolls briefly.
MP3/WMA:
●
Press ALBUM/ PRESET once or more to
select the next or previous album.
➜
Album information scrolls briefly.
or
●
In the stop position, press ALBUM/ PRESET
and 4 / ¢ to select the desired album
and track.
➜
MP3/WMA: Display shows current album/
track number.
Finding a passage within a track
during playback
1
During playback, press and hold 4 / ¢
➜
The CD plays at a high speed.
2
When you recognize the passage you want,
release 4 or ¢.
➜
Normal playback resumes.
18
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more than
once.
1
In the stop position, press PROGRAM to start
programming.
➜
PROG flashes.
2
Press 4 / ¢ once or repeatedly until the
desired track number appears in the display.
●
MP3/WMA: press ALBUM/ PRESET and
4 / ¢ to select the desired album and
track.
3
Press PROGRAM to confirm.
➜
Display shows briefly the number of tracks
programmed.
➜
Then, the display shows the track number
you just stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
➜
FULL is displayed if you attempt to program
more than 20 tracks.
5
Press ÉÅ play the program.
Helpful hints:
– The set will return to the stop position if no
button is pressed within 90 seconds. To resume
programming, press PROGRAM.
– MP3/WMA: When playing a program, use of
ALBUM/ PRESET are void.
Erasing the program
You can erase the contents of the memory by:
●
Press 9
– once if in the stop position;
– twice during playback;
●
Press STANDBY -ON.
●
Select another sound source.
●
Open the CD door.
➜
PROG disappears.
Advertisement
Table of Contents
