Siemens 1000 CA Operating Instructions Manual page 48

Teleprinter
Table of Contents

Advertisement

10 REPLACING THE INK RIBBON
1. Open top cover
Swing paper deflecting
frame to the front
2. Press the lever backwards and swing the printing
mechanism up until it latches
Press lever in the direction of the arrow and pull
ribbon spools off the guide pins. Remove ink ribbon
from lateral guide and pull upwards and out of guide
p l a t e s l o t
4. Hook free ribbon end of new ribbon spool to an empty
spool just as you do when replacing a typewriter
ribbon spool. Place one ribbon spool in position.
Ensure red side of ribbon points upwards. Insert
ink ribbon in the first lateral guide on the ribbon
guide fork, in the guide plate slot and the second
lateral guide. Install second ribbon spool.
5. Press lever backwards
Printing mechanism swings
downwards and latches up
Tear paper off along the
tear-off edge
Close the top cover
Zust.: 3
10-1
A22713-A1000-Y1-*-76l9

Advertisement

Table of Contents
loading

Table of Contents