Table of Contents
Advertisement
4. Open tape retainer lid
5. Insert perforated tape
and press it down
Close tape lid again
6. Operate On/Off button
of tape reader
Observe direction of tape
feed
Two rows of perforations at
the left and three rows at
the right of the feed hole
row
Make sure that the pins of
the sprocket wheel engage
the feed holes
Lamp lit
i l /
Tape is read, the text is
printed, and a new tape
is punched
7. Hold Tape Feed-out button depressed until
several LTRS code combinations have been punched
■
Note:
If a second message follows the first, press
buttons B and J | on the keyboard to seperate
the messages until several LTRS code combinations
have been punched
Zust.: 4
3-13
A22713-A1000-Y1-*-7619
Advertisement
Table of Contents
