Supply Cord; Power Switch - Hoover Vision Reach User Manual

PrEParing YOUr CLEanEr ANER
Insert the main handle in the cleaner body.

SUPPLY COrD

Do not run over the supply cord.
Clip the supply cord in the cord clip
at the back of the handle to avoid
accidentally running the cleaner over
the cord and causing any damage.
Mini TUrBO BrUSH aSSEMBLY*
Assemble the mini turbo brush holder to the
cleaner, then put the mini turbo bush to the
holder*.
* Certain models only
CarPET CarE COnTrOL SELECTOr
The carpet care control selector raises and lowers
the height of the nozzle.
5
3
1
Ensure that the cleaner is in the upright (parked)
position and move the selector to the required
setting for the carpet type or floor covering.
To obtain the best performance and energy
efficiency #1 it is recommended that the adjustment
setting position 1 is used for the main cleaning
operations. The other adjustment settings are
for ease of use, use on longer pile carpets, or for
specialist cleaning tasks.
Settings
1. Best performance and energy efficiency, short to
medium pile carpets, hard wooden floors, wooden
floor boards with crevices, ceramic tiles.
2. Medium pile carpets, delicate floor coverings
such as vinyl or linoleum, parquet flooring.
3 or 4. For longer pile carpets the motion
resistance may increase. Use these intermediate
settings to reduce the force required to push the
vacuum cleaner.
5. Luxury carpet and Tool mode
iMPOrTanT: Using this cleaner for loop pile
carpets with pile greater than 30mm is not
recommended. Please consult the floorcare/carpet
manufacturer's recommended cleaning instruction
before vacuuming.
iMPOrTanT: When cleaning delicate hard floors
such as vinyl or linoleum the selector switch must
be moved to position 2. Failure to do so may cause
damage to the floor surface.
- 4 -
This vacuum cleaner is supplied with an Energy
Label as required by European Regulation (EU)
665/2013. If the label shows a red prohibition circle
on the right covering the hard floor symbol, then this
indicates that the vacuum cleaner is not suitable for
use on hard floors.
#1
nOTE: Dust pick up ability carpet, dust pick up
ability hard floor, and energy efficiency in accord with
4
Commission Regulations (EU) 665/2013 and (EU)
2
666/2013.
CLEanEr rELEaSE
Unlock the cleaner by pressing down on the left
pedal with your foot.

POWEr SWiTCH

To switch the cleaner on or off press down on the right
pedal with your foot.
gB