ZALMAN ZM80D-HP Manual page 13

6.20 Confirming Proper Installation of the Frontside and Backside Heatsinks
Make sure that both heatsinks are parallel with the VGA card, and that side edges of the heatsinks are aligned.
(If the heatsinks are not properly aligned, they need to be reassembled.)
Front
Back
Backside Heatsink
6.21 Installing the Plate Links
1) Assemble the Plate Link Nipples, the Plate Link, and each Bolt C
together as shown in the diagram.
2) Slide in the Plate Link Assembly into the Channels on both of the
Frontside and Backside Heatsinks, then tighten each Nipple.
To add an Optional Fan (ZM-OP1), refer to installation step 7.
www.zalman.co.kr
Frontside Heatsink
Front
Back
Channel
Backside Heatsink
Plate Link Nipple
Plate Link
Plate Link Assembly Plate Link Assembly
Bolt Head
www.zalmanusa.com
Frontside Heatsink
Bolt C(5 mm)
13