Play Discs; Turn On And Select A Source; Control Play - Philips MC1000/12 User Manual

Turn on and select a source

Slide the power switch and source selector to CD or FM.
» The LED indicator beside the LCD screen lights up in red.
‡
To turn off the system, slide it to OFF.
‡
When the power switch and source selector is not in the "OFF"
position and an MP3 link cable is connected to the MP3-LINK
socket, the system automatically switches the source to audio
input through the MP3-LINK socket.
Switch modes
Automatically switch the modes:
After the system stays inactive for 5 minutes in CD mode, it
automatically switches to standby mode.
4

Play discs

1
Slide the power switch and source selector to CD.
2
Lift the cover of disc compartment.
3
Load a disc with the printed side facing upwards.
4
Close the cover of disc compartment.
» Play starts automatically after a few seconds.
‡
If play does not start automatically, press

Control play

During play, follow the instructions below to control play.
Buttons Functions
Start or resume play.
to start play.
LCD screen displays
the track number and