Radio Reception; Plug And Play; First Time Setup/Power Up; Reinstalling Plug And Play - Philips MZ-1200/22 Owner's Manual

Radio Reception

Plug and Play

Plug and Play allows you to store all available
radio stations automatically, starting from FM and
followed by MW band.
When all the available radio stations are stored
or the memory for 40 presets are used, the last
preset radio station will be played.
ö First time setup/power up
ö Reinstalling Plug and Play
All previously stored radio stations will be
replaced.
Notes:
– If no stereo frequency is detected during Plug
and Play, "CHECK ANTENNA" will be displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
To exit without storing the Plug and Play
Press Çon the system.
If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.

Switching on to tuner mode

Press SOURCE or TUNER repeatedly to
select FM or MW band.
12
plug in the
power cord
In standby mode,
PLAY•PAUSE
press and hold
VOL VOL SOURCE
ECO
POWER
SOURCE
PLAY•PAUSE
SEARCH
M Z 1 1 0 0
STOP•EJECT
iR
TUNER
PLAY•PAUSE
PLAY•PAUSE
CD TUNER-FM
CDR AUX MW
TUNER-FM î MW
3139 115 21642