Preparation For Recording; Synchro Start Cd Recording; One Touch Recording; Recording Timer - Philips MCM720/05 User Manual

Tape Operation / Recording

Synchro start CD recording

1
Select CD source.
● Press TUNING S/T (¡/™ on the
remote control) to select the desired track to
start recording.
●
You can programme the tracks in the order you
want them to be recorded (refer to "CD/MP3-
CD Operations - Programming the disc tracks").
2
Press RECORD to start recording.
➜
Playing of the CD programme starts
automatically from the beginning of the CD. It is
not necessary to start the CD player separately.

One touch recording

1
Select CD, TUNER or AUX source.
2
If necessary, start playback of the selected
source.
3
Press RECORD to start recording.

Recording timer

To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
1
Select the preset radio station to record from
(refer to "Radio Reception - Tuning to preset
radio stations").
2
In standby mode, press TIMER SET 3 for
more than two seconds.
➜
The current selected source is displayed.
3
Press SOURCE repeatedly until "REC TUN"
source is displayed.
4
Press TIMER SET 3 to confirm the source.
➜ "SET ON TIME" is displayed and the clock
digits for the hours flash.
18
5
Adjust VOLUME on the front pannel to set the
hours.
6
Press TIMER SET 3 again.
➜
The clock digits for the minutes flash.
7
Adjust VOLUME on the front pannel to set the
minutes.
8
Press TIMER SET 3 to confirm the recording
start time.
➜ "SET OFF TIME" is displayed and the clock
digits for the hours flash.
9
Repeat steps 5-7 to set the finish time.
0
Press TIMER SET 3 to confirm the timer
settings.
➜
is shown and the recording timer is now
set.
Note:
– The recording timer will not be activated if the
system is in tape play mode.
ORIGINAL COPYRIGHT NOTICE
The making of unauthorized copies of copy-
protected material, including computer
programmes, files, broadcasts and sound
recordings, may be an infringement of copyrights
and constitute a criminal offence. This equipment
should not be used for such purposes.