Auto Install Radio Stations; Set Clock; Turn On - Philips DCM250/12 User Manual

Auto install radio stations

When you connect power and no radio
stations are stored, the DCM250 automatically
begins to store radio stations.
1
Connect the DCM250 to the power
supply.
»
[AUTO INSTALL - PRESS PLAY] (auto
install - press the PLAY button) is
displayed.
2
Press on the main unit to start
installation.
»
The DCM250 automatically stores
radio stations with suffi cient signal
strength.
»
When all the available radio stations
are stored, the fi rst preset radio station
is broadcast automatically.

Set clock

1
In standby mode, press PROG to activate
the clock setting mode.
»
The 12 hour or 24 hour format is
displayed.
2
Press / to select 12 hour or 24 hour
format.
3
Press PROG.
»
The hour digits are displayed and begin
to blink.
4
Press / to set the hour.
5
Press PROG.
»
The minute digits are displayed and
begin to blink.
6
Press / to set the minute.
7
Press PROG to confi rm.

Turn on

1
Press .
»
The DCM250 switches to the last
selected source.
Switch to standby
1
Press to switch the DCM250 to
standby mode.
»
The backlight on the display panel is
reduced.
»
The clock (if set) appears on the
display panel.
To switch the DCM250 to Eco Power
Standby mode:
1
In standby mode, press and hold
more than 2 seconds.
»
The backlight on the display panel
turns off.
for
EN 11