Brother ADS-2400N Product Safety Manual page 3

Product Safety Guide
Slots and openings in the casing, back or bottom of the product are provided for
ventilation. To avoid blocking or covering these openings, the product should be
placed where it will not touch any wall or other device. Blocking the unit's ventilation
could create a risk of overheating and/or fire.
IMPORTANT
• Always place the unit on a solid surface, never on a bed, sofa, rug, or similar soft
surfaces.
• DO NOT place the unit in a "built-in" installation.
CAUTION
Avoid placing the unit in a high-traffic area. If you must place it in a high-traffic area, ensure
that the unit is in a safe location where it cannot be accidentally knocked over, which could
cause injury to you or others and serious damage to the unit.
Ensure that cables and cords leading to the unit are secured so as not to pose a tripping
hazard.
Make sure that no part of the unit protrudes from the desk or stand where the unit is located.
In particular, do not leave the output tray open when the machine is located on the edge of
a table, stand, etc. Make sure that the unit is located on a flat, level, and stable surface free
from vibration. Failure to observe these precautions could cause the machine to fall, causing
injury to you and serious damage to the unit.
DO NOT place the unit on an unstable or tilted cart, stand, table or on any tilted/slanted
surface. The machine may fall, causing injury to you and serious damage to the unit.
IMPORTANT
• DO NOT put objects on top of the unit.
• DO NOT place the unit next to sources of interference, such as speakers or the base units
of non-Brother cordless telephones. Doing so may interfere with the operation of the unit's
electronic components.
3