Set Network On Station - Philips Streamium WAS7500/05 User Manual

6 In Set IP Mode screen: If you are using a DHCP* enabled network device, select Automatic.
* DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.

11.3.2 Set network on Station (

If there is no DHCP:
1 Select Static and assign an IP address and subnet mask as prompted, using the alphanumeric
keys (see 4.4 Prepare: Alphanumeric keys).
2 As prompted, select YES to apply the settings.
>
is connected to the external wired network.
On the display, the icon
Applicable if you already have a wired home network (hub/switch/router).
Router
www
Wired
Tip
You can connect
Wireless Audio Device Manager (WADM) in the supplied PC Suite CD. For details, see section
12 Connect to your PC.
Network settings
)
changes to .
or directly to your PC using an Ethernet cable (not supplied) and the
71