Philips PET708/07 Quick Start Manual

PET708_QSG_wk7253.qxd
Philips Portable DVD Player PET708

Quick start guide

1 Charge
1 Switch OFF the set. Attach the battery pack as
shown.
2 You can hear clear 'click' sound when it is
successfully attached.
4
3 Connect the supplied adapter to the set and the
AC outlet.
4 RED light turns on.
5 The battery pack will be fully charged in
approximately 4 hours. When the RED light
goes out, it means that the battery pack is fully
charged.
TIP Your battery will continue to charge while the
player is in use. However, the RED light will be lit
and it will take approximately 8 hours to fully
charge the battery pack.
2007-06-20 3:23 PM Page 1
2
Enjoy
1
7
4
1 Open the lid.
2 Switch ON the set.
3 The GREEN light turns on.
3
4 Open the DVD door using the OPEN switch.
5 Remove protective card (if any).
6 Load the DVD disc.
7 Close the DVD door and the set will
automatically start to playback.
8 Use control keys on the set or remote control.
3 OPEN HERE
2
8
3 6
3

Connect to TV

White
Red
Yellow
1 Connect the set to TV as shown.
2 Please select appropiate input or source on the
TV. You can consult the owner's manual of your
TV. (If your TV does not have Audio and Video
PHILIPS
inputs, you will need to purchase a RF
modulator. Please consult your dealer.)
wk7253