Microtek MIL-800XL Plus User Manual page 20

3. Unlock the TMA.
20 MII-800XL Plus User's Manual
a) Remove the yellow "Unlock"
sticker from the TMA.
b) Look for the locking knob at
the base of the TMA.
c) Turn the locking knob
counterclockwise to the
unlock position "
NOTE: To lock the TMA (for shipping and other purposes), follow the steps
below:
a) Make sure the TMA is connected to the digitizer, then turn off the
digitizer if your digitizer is on.
b) Turn the digitizer back on. The TMA's carriage will move to the standby
position in a few moments.
c) When the indicators on the
front of your TMA and
digitizer stop blinking, turn
the locking knob clockwise
to the lock position "
d) Turn off your digitizer and
disconnect the TMA
connector from the
digitizer. The TMA is ready
for transport.
".
".
Unlocked
Locked