Table of Contents
Advertisement
6. Turn over the foam supports and make
them stand vertically.
7. Lift up the upper foam support.
8. Pull out the Transparent Media Adapter
(TMA) from the bottom foam support.
Then, pull out the digitizer.
Finally, remove the digitizer from the
wrapped plastic bags and place them on a
flat and stable surface where there is
enough space for positioning the
components.
Once the digitizer has been placed in a suitable
location and is ready to be connected to the
computer, you are ready to step forward to the
installation of the necessary software and
hardware for the digitizer.
2
1
MII-800XL Plus User's Manual
15
Advertisement
Table of Contents
