Samsung L830 Service Manual page 40

3> Adjustment Program File
For each of the adjustments, copy the program for each of the adjustments into the SD card.
The file names for each adjustment are the same as"L383ADJ.txt".
4> Adjustment Flow Chart
OK
Inspection for each adjustment
Record a log file for each
adjustment (if necessary)
OK
Save the adjustment value
into the EEPROM.
The adjustment value, and whether it
is OK or not, is displayed on the LCD.
Set the adjustment ID
(EEPROM)
The camera is automatically
turned off or stays on.
Insert the SD card for the corresponding adjustment.
Turn the power on. (Engineer)
Automatically,Test mode enter / adjustment script performance
Check the Adjustment ID
Determines whether it is Good or Bad.
47
Boot Up
Mark the last adjustment ID that
has been completed normally.
Save the adjustment value into
the EEPROM (if necessary)
The adjustment value, and whether it
is OK or not, is displayed on the LCD.
Ⅲ. ADJUSTMENT
NG
NG
Turn the power
off or wait.