Samsung L830 Service Manual page 34

4) Full Firmware
Full Firmware Procedures 1
You can conduct a Full Firmware upgrade if your camera only has the basic functions, according to your needs.
▷Note :
- Full Firmware is a firmware upgrade method that erases all the data and then reinstalls the firmware.
- Since Full Firmware deletes the adjustment data, you have to backup saved adjustment data before
conducing Full Firmware.
- The adjustment data will automatically be backed up into the SD card if you complete the following Full
Firmware upgrade procedures. In this case, you can reload the adjustment data into the camera as follows
without removing the SD card containing the adjustment data.
- Check if the following data files are copied into the SD card before starting a Full Firmware upgrade:
LSCLUT0.BIN, DefectivePixel0.bin, and DefectivePixel1.bin.
1. Insert the SD card containing the firmware file into the camera.
* Updating the firmware will delete all the data in the Flash memory. Be sure to back up all the data onto your
PC before updating the firmware. The firmware file name is always "L383_FULL.ELF".
2. Connect the AC adapter or a fully charged battery.
To upgrade the firmware, the battery level indicator on the LCD monitor must be full (level three).
41
Ⅲ. ADJUSTMENT