Audio Setup Menu; Setting The Downmix; Digital Audio Setup - Philips DVP3005/00 User Manual

Audio Setup Menu

1
In disc mode, press SYSTEM MENU.
2
Press 1 2 to select 'Audio Setup' icon.
3
Press OK to confirm.

Setting the Downmix

This options allows you to set the stereo
analog output of your DVD Player.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {DOWNMIX}, then press 2.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro-Logic decoder.
STEREO
Select this to change channel output to
stereo which delivers sound from only the
two front speakers.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
DVD Setup Menu Options

Digital Audio Setup

The options included in Digital Audio
Setup are: 'Digital Audio' and 'LPCM'.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {DIGITAL AUDIO}, then press 2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Move the cursor by pressing the 3 4
keys to highlight the selected item.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful Hints:
– If DIGITAL AUDIO is set to 'All', all audio
settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48k: Playback a disc recorded at the
sampling rate of 48kHz.
➜
96k: Playback a disc recorded at the
sampling rate of 96kHz.
SYSTEM MENU
.
25