Read your User’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support 3139 246 15561 01-33 DVP3005_LA2a 11/05/05, 3:08 PM...
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO. AVISO IMPORTANTE Philips Mexicana, S.A. de C.V. no se hace responsable por daños o desperfectos causados por: – Maltrato, descuido o mal uso, presencia de insectos o roedores (cucarachas, ratones etc.).
U.S. and world-wide patents issued common and will be easy to complete. and pending. "DTS" and "DTS Digital Go to www.philips.com/support for Surround" are registered trademarks software upgrade. of Digital Theater Systems, Inc .
Due to the numerous versions of new CD-Audio copy protection or enhanced CD-Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD Player is fully compatible with such new discs. Should you have difficulty playing any such CD-Audio discs, kindly refer them to your CD- Audio disc retailer.
Contents Language Code ... Introduction Supplied accessories ... 8 Care and safety information ... 8 Connections Connecting TV ... 9-10 Using Composite Video jacks (CVBS) ... Using Component Video jacks (Pr Pb Y) ... Using an accessory RF modulator ... Connecting the power cord ...
Page 7
DVD Setup Menu Options General Setup menu ... 23 Dimming player’s display panel ... OSD Language ... Sleep ... Screen Saver - turning on/off ... Audio Setup Menu ... 24-25 Setting the Downmix ... Digital Audio Setup ... Video Setup Menu ... 25-27 TV Type ...
– Write only on the printed side of a CDR(W) and only with a soft felt- tipped pen. – Handle the disc by its edge, do not touch the surface. 11/05/05, 3:08 PM 10 cm (4 inches) PHILIPS 10 cm (4 inches) 3139 246 15561...
Connecting TV S-VIDEO AUDIO VIDEO IN COMPONENT VIDEO IN S-VIDEO V (Pr/Cr) AUDIO U (Pb/Cb) VIDEO IN DIGITAL AUDIO IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV system. –...
RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator Use the composite video cable (yellow) to connect the DVD Player’s CVBS jack to...
Optional: Connecting to an Audio System STEREO DIGITAL AUDIO Stereo system has Dolby Pro Logic or Right / Left Audio In jack Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your TV. Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding...
Functional Overview Front and Rear Panels STANDBY-ON B – To switch the DVD Player to Standby mode or ON Disc tray OPEN/CLOSE / – Open/Close the disc tray Display – Shows the current status of the DVD Player Mains (AC Power Cord) –...
Remote Control RETURN / TITLE – To go back to previous menu / show title menu DISC MENU – Enters or exits the disc contents menu – Switches on or off the playback control mode (for VCD version 2.0 only) 1 2 3 4 –...
9-10 “Connecting TV”). Turn on the TV and set to the correct video-in channel. You should see the Philips DVD background screen on the Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details.
Setting up Progressive Scan feature (for Progressive Scan TV only) The progressive scan display twice the number of frames per seconds than interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality. IMPORTANT! Before enabling the progressive scan feature, you must ensure:...
Getting Started To deactivate Progressive manually When the distorted picture still appears on the TV, it may be due to the connected TV does not accept progressive signals, and progressive is set by mistake. You must reset the unit to interlace format.
Step 3: Setting language preference You can select your preferred language settings. This DVD Player will automatically switch to the language for you whenever you load a disc. Setting the OSD Language The On-screen language for the system menu will remain as you set it, regardless of various disc languages.
“Setting up the TV”). Press STANDBY-ON on the DVD Player front panel. ➜ You should see the Philips DVD background screen on the TV. Press OPEN/CLOSE 0 button to open the disc tray and load in a disc, then press the same button again to close the disc tray.
Basic playback controls Unless otherwise stated, all operations described are based on Remote Control use. Pausing playback During playback, press PAUSEÅ. ➜ Playback will pause and sound will be muted. To resume normal playback, press PLAY B. Selecting track/chapter Press T / S briefly during playback to go to the next chapter/track or to return to the beginning of the current chapter/track respectively.
Disc Operations Operations for video playback (DVD/VCD/SVCD) Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load in the disc. To select a playback feature or item Use 1 2 3 4 keys or numeric keypad (0-9) on the remote, then press OK to start playback.
Special DVD Features Playing a Title Press DISC MENU. ➜ The disc menu appears on the TV screen. Use 341 2 keys or numeric keypad (0-9) to select a play option. Press OK key to confirm. Camera Angle Press ANGLE repeatedly to select different desired angle.
Disc Operations Playing MP3/JPEG (Kodak) Picture CD IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 14 “Setting up the TV”). Load a Picture disc (Kodak Picture CD, JPEG). ➜ For Kodak disc, the slide show will begin.
This DVD Player setup is carried out via the TV, enabling you to customise the DVD Player to suit your particular requirements. General Setup menu In disc mode, press SYSTEM MENU. Press OK to confirm. Dimming player’s display panel You can select different levels of brightness for the display screen.
DVD Setup Menu Options Audio Setup Menu In disc mode, press SYSTEM MENU. Press 1 2 to select ‘Audio Setup’ icon. Press OK to confirm. Setting the Downmix This options allows you to set the stereo analog output of your DVD Player. In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {DOWNMIX}, then press 2.
LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM’. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.
DVD Setup Menu Options Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.
Sharpness You can personalize your picture colour by adjusting sharpness. In ‘VIDEO SETUP PAGE’, press 3 4 to highlight {SHARPNESS}, then press 2. HIGH Choose high to make the picture’s edge sharper. MEDIUM Choose medium to get a standard picture. Choose low to make the picture’s edge softer.
DVD Setup Menu Options Preference Page Press Ç twice to stop playback (if any), then press SYSTEM MENU. Press 1 2 to select the ‘Preference Page’ icon. Press OK to confirm. Audio, Subtitle, Disc Menu These menus contain various language options for audio, subtitle and disc menu which may be recorded on the DVD.
Changing the Password This feature is used for Parental Control. Enter your six-digit password when prompted on the screen. The default password is 136900. In ‘PREFERENCE PAGE’, press 3 4 to highlight {PASSWORD}, then press 2 to select {CHANGE}. Use the numeric keypad (0-9) to enter your old six-digit password.
Completely distorted picture or black/white picture with DVD No sound or distorted sound No audio at digital output Visit us at www.philips.com/support for service support 01-33 DVP3005_LA2a Solution – Check if the AC power cord is properly connected. – Press the STANDBY ON on the front of the DVD system to turn on the power.
Page 31
Player does not respond to some operating commands during playback. DVD Player cannot read CDs/DVDs Menu items cannot be selected Visit us at www.philips.com/support for service support 01-33 DVP3005_LA2a Troubleshooting Solution – The DVD+R/CD-R must be finalised. – Ensure the disc label is facing up.
Specifications TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines Playback Multistandard (PAL/NTSC) VIDEO PERFORMANCE DA Converter 12 bit, 108 mHz YPbPr 0.7 Vpp — 75 ohm Video Output 1Vpp — 75 ohm VIDEO FORMAT Digital Compression MPEG 2 for DVD,SVCD MPEG 1 for VCD 50Hz 60Hz Horiz.
Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs.