Playing discs
1
Connect the power cords of the DVD
Player and TV (and any optional stereo or
AV receiver) to a power outlet.
2
Turn on the TV power and set to the
correct Video In channel. (See page 16
"Setting up the TV").
3
Press STANDBY-ON to turn on the
DVD player.
➜
The DVD background screen appears
on the TV.
4
Insert a disc in the disc slot.
5
Place a disc into the disc tray with the
label facing up.
➜
For double-sided discs, load the side
you want to play facing up.
6
Playback will start automatically. If not
press PLAY/PAUSE 2; .
➜
If a disc menu appears on the TV, see
page 22 "Using the Disc Menu".
➜
If the disc is locked by parental control,
you must enter your six-digit password.
(See page 41).
G
For more playback features, see pages 22–
30.
The operating features described here might not be possible for certain discs. Always refer
TIPS:
to the instructions supplied with the discs.
01-48 DVP5965K_75_eng_RC3
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
1
During playback, press PLAY/PAUSE 2;
to pause playback and display a still
picture.
➜
Sound will be muted.
2
To resume normal playback, press
PLAY/PAUSE 2; again.
Selecting track/chapter
G
Press PREV
previous or next track/chapter.
G
In STOP mode, press DISPLAY to
display the disc information text line for
title/chapter/track (example - 00/08).
G
Use alphanumeric keypad (0-9) to
enter valid title/chapter/track number,
then press OK.
➜
The playback skips to the selected
title/chapter/track.
Stopping playback
G
Press STOPÇ.
Helpful hints:
–
Screen saver will start automatically if
the disc playback is stopped/paused for 5
minutes.
–
The player will automatically switch to
Power Standby mode if you do not press any
buttons for 15 minutes after the disc has
stopped playing.
21
Disc Operations
/ NEXT
to go to the
J
K
22/12/06, 11:45 AM
21