Functional Overview
Front and Rear Panels
STANDBY-ON B
– Turns the player on or switches it to
standby mode
Disc slot
– Insert disc here
EJECT /
– To eject the disc
Display
– Shows information about the current
status of the DVD Player
– For connecting microphone
– Microphone volume control
Mains (AC Power Cord)
– Connect to a standard AC outlet
HDMI
– Connect to HDMI - compatible device
(example; LCD/Projector/Plasma/
Projection TV, HDTV or receiver)
CVBS (VIDEO Out)
– Connect to CVBS Video input of a TV
YPbPr (Component Video Out)
– Connect to YPbPr input of a TV
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
14
01-48 DVP5965K_75_eng_RC3
– Input the supported USB device.
– Point the remote control towards this
MIC
LEVEL
– Connect to AUDIO inputs of an
amplifier, receiver or stereo system
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input of a
14
USB Port
9 STOP
– Stops playback
2; PLAY/PAUSE
– Starts or pauses playback
HD UPSCALE
– Set HDMI output, switches the
resolution to '480p', '576p',
'720p'(50Hz), '720p'(60Hz) and
'1080i'(50Hz), '1080i'(60Hz).
IR Sensor
sensor
Audio Out (Left/Right)
digital audio equipment
22/12/06, 11:45 AM