6Axis Sensor Does Not Work - Samsung SM-A920F Service Manual

8. Level 3 Repair
8-4-8-2. 6Axis Sensor

6Axis Sensor does not work

Check the voltage
C3910, C3911 =1.8V
Check 6Axis
MOSI, CLK, NSS, MISO pin
(SPI is OK?)
Check U3010
(crack, open, etc.)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Yes
Yes
Yes
Yes
END
No
No
Abnormal
Replace U7003
Replace UCP4000
Replace U3010