88
Head Restraints
Removing front seat head restraints:
Move the manually adjustable head
restraint slightly forward and pull up to
the stop.
Bring the power adjustable head re
straint to its highest position.
Depress release button (1) to be felt
under the seatback covering material
and pull head restraint up sharply,
holding it by the left head restraint post
(viewed in driving direction). Then pull
out head restraint completely with both
hands.
The release button (1) is located below
the left head restraint post on both front
seats.
Installing front seat head restraints:
Insert the head restraint and push it
down.
With power head restraint it may be
necessary to first push up adjustment
switch for 5 seconds.
Adjust head restraint to the desired
position.
Removing rear seat head restraints:
Pull head restraint up until detent is felt.
Then pull it out sharply using both
hands.
Installing rear seat head restraints:
Insert the head restraint and push it
down.
Adjust head restraint to the desired
position.
Warning!
For your protection, drive only with
properly positioned head restraints.
Do not drive the vehicle without the
front seat head restraints. Head re
straints are intended to help reduce
injuries during an accident.
For positioning of head restraints refer
to pages 32,33 and 35.