Advertisement
Industrial Cabling Technology
FastConnect for Industrial Ethernet
1
Measure the cable length to be removed
4
Trim the strength member
7
Press the connector housing to close it
Assembly with RJ45 plug-in connector 4 x 2
4
Industrial Cabling Technology – Introduction
© Siemens AG 2014
2
Strip the cable jacket with the FC Stripping Tool
5
Unravel and smooth out the twisted wires
8
Firmly fasten the housing with a screwdriver
–
Introduction
3
Pull off the outer sheath and expose the braided
shield
6
Insert the wires into the connector according to
the color code and pull them out on the opposite
side
9
Remove excess wires
Advertisement
