[Audio] Settings - Philips BDP7200/12 User Manual

[Audio] settings

[Night Mode]
Option Description
[Auto]
Activate the Night mode
only during playback of Dolby
TrueHD audio.
[On]
Night mode compresses the
range between soft and loud
sounds. Select this setting for
quiet viewing at night.
[Off] Enjoy surround sound with a
full dynamic range.
[Down Sampling]
• Set the sampling rate for output the PCM
audio from the digital output (coaxial/
optical).
Option Description
[On] Over 96kHz PCM audio will
be down sampled at 48kHz.
[Off] For BD or DVD recorded in
LPCM without copyright
protection, 2-channel audio
signals up to 96 kHz are
output as LPCM signals with
no conversion.
[Virtual Surround]
Option Description
[On] Select [On] to enjoy the
stereophonic virtual space
through your existing 2
channel stereo system during
[Off]
playback of BD-video or
DVD-video.
EN
34
[Blu-ray Disc Audio]
Option Description
[Mix Audio The audio for the secondary
Output]
video and the interactive
application will be output
together with the audio for
the primary video.
[Primary Audio Only the audio for the
only]
primary video will be output.
When playing back a BD-
video which only contains the
primary audio, the audio
output will be the same as
case of [Primary Audio
Only] even if the [Blu-ray
Disc Audio] is set to [Mix
Audio Output]
[HDMI Audio]
• This feature is available only when the
display device is connected by an HDMI
cable. Refer to chapter 'Set-up - Set HDMI
audio format' for more information.
Option Description
[HDMI Set the audio format for the
Normal]
sound output from the
HDMI OUT.
[PCM]
[Off]