Philips BDP7200/12 Quick Start Manual

Troubleshooting

No reaction to the remote control.
Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries correctly.
Insert new batteries in the remote control.
Cannot play back a disc.
Make sure that the product supports the disc.
Make sure that the Blu-ray Disc player supports the region code of DVD or BD (BD: B, DVD: All or 2).
For DVD±RW/±R, make sure that the disc is finalised.
No video signal on the display device.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution using OUTPUT on the front panel.
Press and hold B on the front panel for 5 seconds to change the setting back to its default.
No 5.1-channel aduio from the loudspeakers of the audio system.
Does the disc contain 5.1-channel audio? The 5.1-channel audio is not available when the disc does not contain it.
Does the audio system support 5.1-channel audio? The 5.1-channel audio is not available when the audio system does
not contain it.
In the settings menu, set [HDMI Audio] to [Off].
Need help?
User Manual
See the user manual that came with your Philips Blu-ray disc player.
bdp7200_EUqsg_eng1.indd 1 bdp7200_EUqsg_eng1.indd 1
Register your product and get support at
www.philips.com/welcome

Quick Start Guide

What's in the box?
(high speed)
2008 C Philips Consumer Lifestyle
All rights reserved.
Printed in China
E5J10ED
1VMN26154
Blu-ray Disc Player
HDMI cable RCA Audio/
Video cables
BDP7200
1
Connect
2
Set up
3
Enjoy
Remote Control Power cable
and 2 batteries
User Manual
User Manual User Manual
in CD-ROM
7/15/2008 5:53:45 PM 7/15/2008 5:53:45 PM