Connect A Usb Device; Connect A Network; Connect Power; Get Started - Philips BDP5100/12 User Manual

Tip
•
The HDMI connection provides best audio quality.
Connect to digital AV amplifier/receiver
Connect to coaxial jack
COAXIAL
1
Connect a coaxial cable (not supplied) to:
• the COAXIAL jack on this product.
• the COAXIAL/DIGITAL input jack on
the device.
Connect analogue stereo system
1
Connect the audio cables to:
• the AV OUTPUT-L/Ron this product.
• the AUDIO input jacks on the device.

Connect a USB device

A USB device provides an additional memory to
enjoy software updates and BD-Live.
1
Connect a USB device to the
on the front panel of this product.
Note
•
Press , and select [Browse USB] in the menu to access
the content and play the files.
•
Connect a USB device only to the
product.
•
Philips does not guarantee compatibility with all USB
devices.
AUDIO IN
(USB) jack
jack of this

Connect a network

With a wired or wireless connection (see "Get
started" > "Set up a network"), you can connect
this product to:
• the Internet (for software update/BD Live).
• or a home network (to access media files
from a DLNA media server, e.g. PC).
Note
•
Internet access to Philips website for software update
may not be allowed, depending on the router you use
or the Internet Service Provider's policy. Contact your
Internet Service Provider for more information.

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
•
The type plate is located on the back of the product.
1
Connect the AC power cable to:
• this product.
• the wall socket.
»
This product is ready to be set up for use.

4 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.

Prepare the remote control

1
Press and push the battery compartment to
slide it open (see "1" in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see "3" in the illustration).
EN 9