Clock setting
See page 18.
Timer setting
The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time (one time operation). The clock
time needs to be set first before the timer can
be used.
1
In standby mode, press and hold TIMER SET
for more than two seconds.
"SELECT SOURCE" scrolls followed by
"SOURCE".
2
Select your desired source and press TIMER
SET to confirm
"SET ON TIME" scrolls followed by "ON 0 :
00".
3
Press VOLUME +/- to set the hours and
press TIMER SET to confirm.
4
Press VOLUME +/- to set the minutes and
press TIMER SET to confirm.
"SET OFF TIME" scrolls.
5
Press VOLUME +/- to set the hours and
press TIMER SET to confirm.
6
Press VOLUME +/- to set the minutes and
press TIMER SET to complete the setting.
The timer is now set and activated.
Activating and deactivating timer
In standby or during playback, press TIMER
SET once on the remote control.
Display shows
if deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1
Press SLEEP on the remote control repeatedly
to select a preset time.
The selections are as follows (time in
minutes):
90 ™ 80 ™ 70 ™ 60 ™ 50 ™ 40 ™ 30 ™
20 ™ 10 ™ OFF
"SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
2
When you reach the desired length of time, stop
pressing the SLEEP button.
To deactivate the sleep timer
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
Clock/Timer
if activated, and disappears
33