Step 4: Connecting The Subwoofer - Philips MCD280/30 User Manual

Connections
RF coaxial cable to TV
ANT IN TO TV
VIDEO
Antenna or
Back of RF Modulator
Cable TV signal
COMPONENT VIDEO OUT
Pr/Cr
DIGITAL OUT
IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
Use the composite cable (yellow) to connect the
system's CVBS jack to the video input jack on
the RF modulator.
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV's RF jack.
14
AUDIO IN
IN R L
CH3 CH4
(example only)
FM aerial 75
Pb/Cb Y
VIDEO OUT S-VIDEO OUT
Step 4: Connecting the
subwoofer (
)
supplied
Subwoofer
speaker
(right)
IMPORTANT!
Ensure that the speaker cables are
correctly connected. Improper
connections may damage the system due
to short circuit.
Do not connect speakers with an
impedance lower than that of the
speakers supplied.
Place the subwoofer on the floor near the TV.
Connect the subwoofer to the SUBWOOFER
OUT jack on the DVD micro system.
Connect the power cable for the subwoofer.
not
4
SUBWOOFER OUT
+
speaker
R
(left)
-
-
L
+
SPEAKER
8