Philips 24HFL3014 User Manual page 24

3. Select Digital and analogue channels, Only digital
channels, or Only analogue channels.
4. Select Start and press OK to update channels.
This can take a few minutes.
Channel Settings
 (Home) > Settings > Antenna/cable
installlation > Search for channels > Re-install
channels
1. Select the country where you are now and
press OK.
2. Select Antenna (DVB-T) or Cable (DVB-C) , and
select one item you need to re-install.
3. Select Digital and analogue channels, Only digital
channels, or Only analogue channels.
4. Select Settings and press OK.
5. Press  (red) to reset, or press
complete the settings.
Frequency scan
Select the method of searching for channels.
- Quick: select the faster method and use the
predefined settings used by most cable providers in
your country.
- Full: If this results in having no channels installed or
if some channels are missing, you can select the
extended Full method. This method will take more
time to search for and install channels.
- Advanced: If you received a specific network
frequency value to search for channels, select
Advanced.
Network frequency mode
If you intend to use the fast Quick method
in Frequency scan to search for channels,
select Automatic. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select Manual.
Network frequency
With the Network frequency mode set to Manual,
you can enter the network frequency value received
from your cable provider here. To enter the value,
use the number keys.
Symbol rate mode
If your cable provider did not give you a
specific symbol rate value to install the TV channels,
leave the Symbol rate mode setting on Automatic.
If you received a specific symbol rate value,
select Manual.
Symbol rate
With the Symbol rate mode set to Manual, you can
enter the symbol rate value by using the number
keys.
Free / Scrambled
If you have a subscription and a CAM - Conditional
 (green) when
24
Access Module for pay TV services, select Free +
scrambled. If you did not subscribe to pay TV
channels or services, you can select Free
channels only .
Digital: Reception Test
 (Home) > Settings > Antenna/cable
installlation > Digital: Reception test
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with  and  and change the number
with  and . To check the frequency,
select Search and press OK.
If you use DVB-C to receive channels, the
option Symbol rate mode is available. For Symbol
rate mode, select Automatic, unless your cable
provider gave you a specific symbol rate value. To
enter the symbol rate value, select Symbol rate, and
use the number keys or  and .
Analogue: Manual Installation
 (Home) > Settings > Antenna/cable
installlation > Analogue: Manual Installation
Analogue TV channels can be manually installed,
channel by channel.
System
To set up the TV system, select System.
Select your country or the part of the world where
you are now and press OK.
Search Channel
To find a channel, select Search channel and
press OK. You can enter a frequency yourself to find
a channel or let the TV search for a channel.
Press OK, select Search and press OK to search
for a channel automatically. The found channel is
shown on screen and if the reception is poor,
press Search again. If you want to store the channel,
select Done and press OK.
Fine tune
To fine tune a channel, select Fine tune and
press OK. You can fine tune the channel
with  or .
If you want to store the channel found,
select Done and press OK.