Table of Contents
Advertisement
[ Audio Sync ]
Set the default delay time for audio output
when you play a video disc.
1.
To start, press
OK.
2.
Press
b B to set the delay time.
3.
Press
OK to confi rm and exit.
[ Night Mode ]
Make loud sound level softer and soft
sound level louder so that you can watch
the DVD movies at a low volume, without
disturbing others.
Note
•
This setting is only applicable to Dolby Digital
encoded DVD.
•
[
On ] – for quiet viewing at night
(DVDs only).
•
[
Off ] – enjoy surround sound with a
full dynamic range.
[ CD Upsampling ]
Convert the music CD to a higher
sampling rate using sophisticated digital
signal processing for better sound quality.
•
[
Off ] – turn off CD-upsampling.
•
[
On ] – convert the sampling rate of
the CDs twice as high as the original
rate.
Video setup
1
Press OPTIONS.
[ General Setup ] menu is displayed.
2
Press V to select
press B.
3
Select an option, then press OK.
Video Setup
TV Type
TV Display
Picture Setting
HDMI Setup
Closed Caption
•
See the explanations of the above
options in the following pages.
4
Select a setting, then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press
[ TV Type ]
If the video does not appear correctly,
change the setting. By default, this setting
matches the most common setting for TVs
in your country.
•
[ PAL ]
– for PAL-system TV.
•
[ NTSC ]
– for NTSC-system TV.
•
[
Multi ] – for TV that is compatible
with both PAL and NTSC.
[ Video Setup ], then
OPTIONS.
EN 31
Advertisement
Table of Contents
