Mounting
3.
M
OUNTING
The drive must be mounted in vertical position on the wall or on the back plane of an enclosure. Ensure
that the mounting plane is relatively even.
The drive shall be fixed with four screws (or bolts, depending on the unit size).
3.1
Dimensions
3.1.1
Wall mount
128 (5.03)
Ø7 (.27)
100 (3.93)
Ø13 (.51)
100 (3.93)
mm (in.)
24-hour support +1-800-877-7545 (Dial 2)
Figure 3. Siemens drive dimensions, FS4, wall mount
190 (7.48)
Siemens Industry, Inc. • 13
Type 1 / IP21
Ø25 (.98)
Type 12 / IP54
Ø25 (.98)
BT9080