Table of Contents
Advertisement
50 Editing: Disc Information Screen
You can change Disc settings for a DVD+RW or unfinalized DVD+R from
the Disc Information Screen.
1
When in the Index Picture Screen, press STOP C to select
the first Title on the DVD+RW/DVD+R.
2
Press CH+8 to enter the Disc Information Screen.
3
In the Disc Information Screen, press : to enter the
Settings menu. This action is not possible if a finalized DVD+R is
in the Recorder.
Settings for XXXXXX
s L 0 1 D isc name
Protection
Erase disc
DVD+RW example
4
Press CH+8 or CH-9 to select Disc name, Protection,
Erase disc (DVD+RW only), or Finalize disc (unfinalized
DVD+R only). Proceed according to the feature you chose.
Disc name (DVD+RW and DVD+R)
Press :. Press ; or : to choose the character position,
then press CH+8 or CH-9 to enter a character. Press
SELECT to alternate between capital and lower case characters.
Press CLEAR to erase a character (the space will remain). Repeat
this process until you enter the complete name. To save the
name, press OK. "Storing name" will appear briefly.
Protection (DVD+RW and DVD+R)
Press :. Press CH+8 or CH-9 to select Protected or
Unprotected, then press OK.
If you choose Protected, you cannot change the Disc, including
recording or editing. "Disc locked" will appear on the TV briefly.
To edit or record again, select Unprotected.
Remember, protecting a DVD+R is not the same as finalizing it.
Finalization cannot be undone.
Erase disc (DVD+RW only)
Press OK. "This will erase all titles Press OK to confirm" will
appear. Press OK again to begin erasing. (If you decide not to
erase the Disc, press ;.) "Erasing disc" appears until erasing is com-
plete.When the Disc is erased, the Index Picture Screen will reap-
pear, showing the free space on the Disc.
Finalize disc (Unfinalized DVD+R only)
Press OK. "Finalizing disc" will appear until finalization is complete.
This may take a few minutes.Then, the Index Picture Screen will
reappear. You cannot unfinalize a DVD+R, and you cannot
record or edit the DVD+R after you finalize it.
A DVD+R will play on other DVD Players only after the Disc is
finalized.
5
If necessary, press ; when you are finished and want to return
to the Disc Information Screen. Press CH-9 to return to the Index
Picture Screen.
B sample
Unprotected
STANDBY
MONITOR
TV / DVD
T / C
PLAY MODE REC. MODE
1
2
3
4
6
5
8
7
9
0
DISC
SYSTEM
MENU
2-5
OK
SELECT
CH
CH
TIMER
FSS
TV VOLUME
RETURN
CLEAR
PLAY
1
STOP
I
I
AUDIO
PAUSE
REC/OTR
Helpful Hints
• For information on the Index
Picture Screen, see page 32.
• These settings are not change-
able for a finalized DVD+R.
• If a DVD+R was recorded on a
different DVD Recorder, the set-
tings may not be accessible.
• A disc name may contain a
maximum of 64 characters.
Advertisement
Table of Contents
