Selecting Voices; Selecting And Playing A Voice; Layering Voices; Split - Alesis VIRTUE AHP-1 User Manual

Selecting Voices

Selecting and Playing a Voice

1. Press the Voice button.
2. To select a new voice, press the 0-9, + or – buttons. The name of the newly selected
voice will be shown on the display screen after it is selected.
3. Play the keys to hear the new voice.
Note: If Layer mode or Split mode is on, repeatedly press the Voice button to switch between
the first and second voice or between the upper and lower voice.
Tip: A full list of the 360 built-in voices is available in the

Layering Voices

Virtue features a Layer mode that enables two sounds to be layered together, creating a more
complex and full sound. To layer two voice together:
1. Select the first voice.
2. Press the Layer button to turn Layer mode on.
3. Press the 0-9, + or – button, or a Voice Select button to select the second voice.
4. Play the keys to hear the two different voices layered together.
To disable Layer mode, press the Layer button again.
If Layer mode is enabled, you can repeatedly press the Voice button to switch between the
first and second voice and select different voices.

Split

Split mode enables you to split the 88 keys into two zones so that you can play two different
voices for each of your hands. For example, you may want the Piano voice for your right hand,
and the Bass voice for your left-hand. When Split mode is enabled, the left-hand voice is
referred to as the Lower voice. To turn the Split mode on or off, press the Split button.
To set the split point:
1. Press the Function Menu button repeatedly to cycle through to the Keyboard Split
setting.
2. Press the -/+ buttons or a piano key to set the keyboard split point.
Tip: Press the -/+ buttons at the same time to reset the split point to the default value, F#3.
If Split mode is enabled, you can repeatedly press the Voice button to switch between the
upper and lower voice and select different voices.
Note: If you are using the Layer mode and Split mode at the same time, only the upper region
will use the Layer Voice function.
10
Appendix section of this manual.