Advertisement
Bluetooth
wireless technology
®
SPEAKER OPERATION
To connect to the Broan-NuTone Bluetooth
Speaker for the first time:
1.
To play your personal music or audio files, you need a Bluetooth
wireless technology enabled Smart Phone, Tablet, or any other
such device.
2.
Set your device to a low-to-midrange volume before connecting to
the speaker.
3.
Make sure Fan is ON and Bluetooth
device is located within 10 meters (approximately 33 feet) of the
Speaker/Fan.
4.
Pairing your Bluetooth
wireless technology enabled device with
®
the Speaker:
a.
For iPad/iPhone/iPod touch:
i. From your iPad/iPhone/iPod touch home page, tap
Settings.
ii. From Settings, tap General (if you have iOS 7 or
greater, you can skip this step).
iii. From General, tap Bluetooth.
iv. Move the Bluetooth
ON already). When you do this, a list of discoverable
Bluetooth
wireless technology devices will appear.
®
v. The Broan-NuTone Speaker has the Bluetooth
"Sensonic™ Vent Fan".
in the list of Discoverable Devices. If not, turn the
Fan OFF, then ON, then turn Bluetooth
•
If "Sensonic™ Vent Fan" is still not on the list,
consult with the owner's manual for your device
and follow the procedure for Pairing/Connecting a
Bluetooth
wireless technology device.
®
vi. Tap on "Sensonic™ Vent Fan" to complete the pairing
of the Bluetooth
your Apple device.
b.
For Android Phone/Tablet:
i. From your smart phone/tablet home page, tap Settings.
ii. From the Settings menu, go to Wireless & Controls,
Wireless & Networks, or something similar.
iii. Find Bluetooth
®
similar and tap Bluetooth
to ON (if it isn't on already).
iv. On the Bluetooth
"Search for Devices" or something similar.
v. The Broan-NuTone Speaker has the Bluetooth
identifier "Sensonic™ Vent Fan".
should show up in the list of Available Devices. If not,
turn Fan OFF, then ON, and repeat pairing procedure.
•
If "Sensonic™ Vent Fan" is still not on the list,
consult with the owner's manual for your
Android device and follow the procedure
for Pairing/Connecting a Bluetooth
vi. Tap on "Sensonic™ Vent Fan" to complete the pairing
of the Bluetooth
your Android device.
When it comes to quality rv vents, Broan is the brand you can depend on.
wireless technology
®
wireless technology enabled
®
Slider to ON/green (if it isn't
®
identifier
®
This identifier should be
OFF, then ON.
®
wireless technology Speaker with
®
, Bluetooth
Settings or something
®
or move Bluetooth
Slider
®
®
screen, tap "Scan for Devices",
®
This identifier
device.
®
wireless technology Speaker with
®
c.
For all other Bluetooth
i. Follow the instructions that came with your Bluetooth
wireless technology enabled Phone, Tablet or Pad
device to set it to search for Bluetooth
technology accessories.
ii. Most Bluetooth
will require you to go to the "Paired Devices" (or
similar) screen and SELECT "Search for Devices" or
something similar.
iii. The Broan-NuTone Speaker has the Bluetooth
"Sensonic™ Vent Fan". This identifier should show
up in the list of Available Devices, Discoverable
Devices or similar. If not, turn Fan OFF, then ON, and
repeat pairing procedure.
1.
5.
Open up the audio program on your device and play your music
or other audio files. The audio file should play over the Bluetooth
Speakers.
2.
6.
When done playing/listening to your audio files, disconnect from
the Speaker by either turning OFF the fan, disconnecting Bluetooth
wireless technology from your device (Smart Phone, Tablet, etc)
or simply walking away. The Bluetooth
automatically disconnect when the device is out of range of the Speaker,
which should occur when device is approximately 10 meters (33 feet)
away from the Speaker.
To connect to the Bluetooth
subsequent time (after initial connection is made):
1.
The Sensonic™ Speaker can only play audio files from one Bluetooth
wireless technology device at a time, therefore one device must be
DISCONNECTED (but not necessarily UNPAIRED) before using the
Speaker with another device.
2.
If your Bluetooth
®
not UNPAIRED from the Speaker last time it was used, then it should
automatically connect next time the device is within range of the
Speaker, unless the Speaker is already CONNECTED to another device.
a.
If your device does not CONNECT automatically with the
Speaker, then find your "Paired Devices" or similar list and
TAP on "Sensonic Vent Fan" to reconnect with the Sensonic™
Speaker.
3.
If your Bluetooth
®
Speaker after the last time it was used, you must follow the connection
procedure in the previous section for PAIRING your device with the
®
Speaker.
4.
Open up the audio program on your device and play your music or
other audio files. The audio file should play over the Bluetooth
technology Fan Speakers.
5.
When done playing/listening to your audio files, disconnect from
the Speaker by either turning OFF the fan, disconnecting Bluetooth
wireless technology from your device (Smart Phone, Tablet, etc)
or simply walking away. The Bluetooth
automatically disconnect when the device is out of range of the Speaker,
which should occur when device is approximately 10 meters (33 feet)
away from the Speaker.
MODEL SPK110
wireless technology enabled devices:
®
wireless technology enabled devices
®
wireless technology will
®
wireless technology Speaker each
®
wireless technology device was DISCONNECTED but
wireless technology device was UNPAIRED from the
wireless technology will
®
Page 5
®
wireless
®
identifier
®
Fan
®
®
®
wireless
®
®
Advertisement
