Table of Contents
Advertisement
Recording
About timer recording
Use 'Timer Recording' to automatically
start and stop a recording at a later date/
time. The DVD recorder will tune to the
right programme channel and begin
recording at the specifi ed time.
With this DVD recorder, you can
preprogramme up to 8 recordings.
To make a timer recording, your
DVD recorder needs to know:
– The date you want to make the
recording.
– The recording input source.
– The start and stop time of the
recording.
– The recording mode, see page 28.
OK
About 'VPS/PDC'
'VPS' (Video Programming System) or
'PDC' (Programme Delivery Control) is
used to control the start and duration of
TV channel recordings. If a TV programme
starts earlier or ends later than was
scheduled, the DVD recorder will then
switch on and off at the correct time.
VPS/PDC is intended to record the entire
programme. To set a timer that is longer/
shorter than the VPS/PDC broadcast
time, you must turn off the VPS/PDC.
TIPS: Ensure that there is suffi cient space available on the DVD±R/±RW before recording.
You have to fi nalise the DVD±R before it can be played on other players, see page 36.
30
1_dvdr3305_05_eng_16862.indd 30
1_dvdr3305_05_eng_16862.indd 30
(continued)
TIMER
Timer recording (manually)
A
Turn on the TV power. Select the
correct Video In channel at the TV.
B
Press TIMER on the remote control.
The timer schedule list appears.
Timer Schedule
Source RecMode Date
1
2
3
4
5
6
C
Press OK on the remote control.
The VIDEO P
LUS
appears.
VIDEO Plus+ System
Enter the VIDEO Plus+ programming
number for the show you wish to
record. Press CANCEL to return
to timer schedule or [TIMER] to
exit timer.
5
Confirm
D
Select
in the menu and press OK.
CANCEL
The timer editor menu appears.
Timer Editor
Source
Rec Mode
Mode
Date
Start
End
VPS
OK
E
Use
keys to select an entry in the
menu and press
to enter its options.
Start
End
VPS
®
+
System menu
Cancel
OK
Ch003
2 Hour Mode
Once
31 / 01 / 05
12 : 33
13 : 03
Off
Cancel
OK
2005-10-31 5:00:05 PM
2005-10-31 5:00:05 PM
Advertisement
Table of Contents
Troubleshooting
