Connecting The Audio Cables - Philips DVDR3450H/05 User Manual

Step 1: Basic Recorder Connections
TV-OUT ANTENNA-IN
TV

Connecting the audio cables

This connection enables you to listen to
the sound. However, this connection is
not required if this recorder is connected
to the TV using the supplied SCART
cable.
Option 1: Using an audio cable
You can connect the recorder to a two
channel stereo system (mini system, TV)
or receiver in order to enjoy the stereo
sound system.
Use the supplied audio cable (red/white
ends) to connect the AUDIO L/R
sockets to these devices with the same
input sockets.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
dvdr3450h_eu_eng_24502.indd 17 dvdr3450h_eu_eng_24502.indd 17
2 1
EXT AUX - I/O EXT TO TV - I/O
Option 1
TV/ Stereo
VIDEO (CVBS)
OUTPUT
L
R
COAXIAL
S-VIDEO (Y/C) AUDIO (DIGITAL AUDIO)
OR
DIGITAL IN
AV amplifi er/
receiver
Option 2: Using a coaxial cable
You can connect the recorder to an AV
amplifi er/receiver in order to enjoy
multichannel surround sound.
Use a coaxial cable (not supplied).
Connect the COAXIAL (DIGITAL
AUDIO) socket on the recorder to the
digital input of the amplifi er/receiver.
Before you start operating, set the digital
audio output settings accordingly (see the
section "PLAYBACK settings – Digital
Audio Output"). If the AUDIO settings
do not match your amplifi er's capabilities,
the amplifi er may produce a strong,
distorted sound or no sound at all.
Helpful Hint:
– Do not connect your TV's audio output
sockets to the AUDIO L/R (IN-EXT) sockets
on this recorder, this may cause unwanted
noise.
(continued)
Option 2
17
2007-05-29 5:25:57 AM 2007-05-29 5:25:57 AM