Philips HDR3700/05 User Manual page 77

E2N41BN_EN.book Page 77 Wednesday, July 2, 2008 4:36 PM
Audio Language (Default: Original)
4
(DVD only)
Set "Audio Language".
Select a setting using [U \ D], then
press [OK].
General Settings
Disc Playback
Parental Lock
Disc Audio
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Your setting is activated.
If "Original" is selected, the audio language is the
default of the inserted disc.
5 Subtitle Language (Default: OFF) (DVD only)
Set "Subtitle Language".
Select a setting using [U \ D], then
press [OK].
General Settings
Disc Playback
Parental Lock
Disc Audio
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Your setting is activated.
If "Other" is selected, enter the
appropriate 4-digit code using
[Alphanumeric keypad].
Refer to "Language Code" on page 95.
ALL
Code Input
8
7
6
5
4
3
When you finish entering the code,
press [OK].
Hint
• You can also change or switch off the subtitles on a
DVD from the disc menu if it is available.
• Press [CLEAR] or [L] to erase numbers entered
incorrectly.
Note
• You can only select the languages supported by the
inserted disc.
• "Audio Language" setting may not be available for
some discs.
Audio Language
Original
English
Other
Subtitle Language
OFF
English
Other
6
Angle Icon (Default: ON) (DVD only)
Set "Angle Icon".
Select a setting using [U \ D], then
press [OK].
General Settings
Disc Playback Angle Icon
Parental Lock ON
Disc Audio OFF
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Your setting is activated.
7
Still Mode (Default: Auto) (DVD only)
Set "Still Mode".
Select a setting using [U \ D], then
press [OK].
General Settings
Disc Playback Still Mode
Parental Lock
Auto
Disc Audio Field
Disc Menu Language Frame
Audio Language
Subtitle Language
Angle Icon
Still Mode
Your setting is activated.
Auto: Automatically select the best resolution
setting ("Frame" or "Field") based on the
data characteristics of the pictures.
Field: Select "Field" when the pictures are still
unstable even if "Auto" is selected. "Field"
stabilises the pictures, although the picture
quality may become coarse due to the
limited amount of data.
Frame: Select "Frame" to display relatively
motionless pictures in higher resolution.
"Frame" improves the picture quality,
although it may destabilise the picture due to
simultaneous output of two fields of data.
Note
• An individual picture on TV screen is called Frame,
which consists of two separate images called Fields.
Some pictures may be blurred at the "Auto" setting
in still mode due to their data characteristics.
8
Skip/Replay Interval
Assign [SKIP] or [REPLAY] to skip or rewind by a
certain amount of time when they are pressed.
Select a desired item using [U \ D],
then press [OK].
General Settings
Skip/Replay Interval
Skip 5 seconds
Replay 15 seconds
30 seconds
1 minute
5 minutes
77
EN