FIRMWARE UPDATING
Software updating procedure (using USB Mass-storage
device)
1. Copy APP code upgrade.pkg to USB flash disk (root folder).
2. Plug the USB device into the USB slot on the TV.
3. Software updating wizard will be displayed. Select "YES" and press "OK" button on
the remote control to start the updating.
4. Turn the TV off/on to install the software automatically.
5. Unplug USB flash disk and Turn the TV off/on again.
Figure 1 USB Mass-storage device
Figure 2 USB slot
Figure 3 Updating wizard 1
Figure 4 Updating wizard 2