Before You Begin - IBM System Storage EXN3200 Installation And Setup Instructions

Storage expansion unit
Table of Contents

Advertisement

Before you begin

®
®
This document provides installation and setup instructions for the IBM
System Storage
EXN3200
storage expansion unit, sometimes referred to as a shelf in this and other documents.
Additional information about the EXN3200, including a comparison between the EXN3200 and other N
series storage expansion units, can be found in the IBM System Storage EXN3200 Storage Expansion Unit
Hardware and Service Guide.
Detailed SAS and Alternate Control Path (ACP) cabling information can be found in the IBM System
Storage N series Universal SAS and ACP Cabling Guide.
For additional information about the EXN3200 and related topics, refer to the following resources.
v IBM System Storage N series Introduction and Planning Guide
v IBM Environmental Notices and User Guide
v IBM System Storage N series support website at www.ibm.com/storage/support/nseries/
Read the safety notices
Before continuing, make sure that you have reviewed the safety notices in the documentation that came
with this system. Do not plug any cables into the system, adapters, or any electrical outlets until you
have reviewed the safety information and followed the procedures in this document.
Need help?
If you encounter any difficulties while setting up your system, contact IBM service and support for
assistance. More information can also be found on the IBM System Storage N series support website:
www.ibm.com/storage/support/nseries/
About the IBM N series support website
The IBM System Storage N series support website requires users to register in order to obtain access to N
series support content on the web. To understand how the N series support web content is organized and
navigated, and to access the N series support website, go to the following publicly accessible web page:
www.ibm.com/storage/support/nseries/
This web page also provides links to AutoSupport information as well as other important N series
product resources.
Software requirements
For new storage system installations, your storage system must be running Data ONTAP 8.1.1 or later
release in the 8.x release family.
Customer-supplied items for installation
v #2 Phillips screwdriver
v Flat-bladed screwdriver
v Antistatic electrostatic discharge (ESD) wrist strap and grounding leash
v
© Copyright IBM Corp. 2009, 2012

Advertisement

Table of Contents
loading

Table of Contents