Installing The Modules; Installing The Router - Cisco 800M Series Installing Manual

Figure 2-7
Mount the router into the rack using the screws provided in the rack.
Step 2

Installing the modules

You can choose either slot 0 or slot 1 for inserting modules.
Combination of modules supported by Cisco 800M Series ISR is as follows:
•
•
Two 3G modules are not supported at a time.
Note
Make sure that the router is powered off before inserting the modules.
Warning
To remove the blank module, use screw drivers to loosen the screws. The screws are designed in way
Step 1
that after it disengages, user can hold the screws and pull the blank cover out.
Step 2 Remove the blank covers for the slots where you want to insert the module as shown in
Cisco 800M Series Integrated Services Router Hardware Installation Guide
2-8
Attaching the Brackets (I/O side facing the user - Offset rack mount)
1
Offset rack mount
One 3G module and one serial port module.
Two serial port modules.
Chapter 2

Installing the Router

1
Figure 2-8.