Philips HTS5553/98 User Manual page 23

Sound
No sound from home theater speakers.
•
Connect the audio cable from your home
theater to your TV or other devices (see
'Connect audio from TV and other devices'
on page 8 ) .
•
Set up the audio for the connected device
(for HDMI connection only) (see 'Set up the
audio' on page 10 ) .
•
Reset your home theater to its factory
settings (see 'Restore default settings' on
page 17 ) , then switch it off and switch on
again.
• On your home theater, press SOURCE
repeatedly to select the correct audio input.
Distorted sound or echo.
•
If you play audio from the TV through the
home theater, make sure that the TV is muted.
Audio and video are not synchronized.
•
1) Press and hold AUDIO SYNC . 2) Press
the +/- or Navigation buttons within 5
seconds to synchronize the audio with the
video.
Play
Cannot play a disc.
•
Clean the disc.
•
Make sure that the home theater supports
the type of disc (see 'Media formats' on page
19 ) .
•
Make sure that the home theater supports
the region code of the disc .
•
If the disc is a DVD±RW or DVD±R disc,
make sure that it is fi nalized.
Cannot play a DivX fi le.
•
Make sure that the DivX fi le is encoded
according to the 'Home Theater Profi le' with
the DivX encoder.
•
Make sure that the DivX fi le is complete.
DivX subtitles do not display correctly.
•
Make sure that the subtitle fi le name is the
same as the movie fi le name (see 'Subtitles'
on page 12 ) .
•
Select the correct character set (see
'Subtitles' on page 12 ) .
Cannot read the contents of a USB storage device.
•
Make sure that the format of the USB
storage device is compatible with the home
theater.
•
Make sure that the fi le system on the USB
storage device is supported by the home
theater.
'No entry' or 'x' sign appears on the TV.
•
The operation is not possible.
EasyLink does not work.
•
Make sure that the home theater is
connected to a Philips brand EasyLink TV, and
the EasyLink option is turned on (see 'Set up
EasyLink (HDMI-CEC control)' on page 10 ) .
When you switch on the TV, the home theater
automatically switches on.
•
This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theater work independently, switch off
EasyLink.
EN 21