Table of Contents
Advertisement
Programming disc tracks
(for audio CDs and VCDs)
You can play the contents of the disc in
the order you want by programming the
playing order of the tracks. Up to 99
tracks can be stored.
A
Stop playback, press PROGRAM on the
remote control.
"P00:00" will appear on the display
panel.
B
Use the numeric keypad (0-9) to
enter a valid track/chapter number.
C
Press OK to store the track.
"FULL" will appear if you have
programmed 99 tracks.
D
Repeat
B
~
C
to select other tracks.
E
Press N to start program playback.
To clear programmed track, press
STOP Ç twice.
Helpful Hint:
– If the DVD system is disconnected from
the power supply, it will erase the program.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
Disc Operations
Other playback features
Using the Disc Menu
Depending on the disc format, a menu
may appear on the TV screen once you
load the disc.
To select a playback feature or item
Use
keys or numeric
keypad (0-9) on the remote control,
then press OK to start playback.
To access or remove the menu
Press DISC MENU on the remote
control.
For VCD (2.0) with playback control
feature (PBC)
During playback, press DISC MENU
will return to the main menu screen (if
PBC is turned on).
(continued)
27
Advertisement
Table of Contents
