Before cleaning, turn the heater off, and disconnect from the mains supply. The
heater may then be cleaned using a damp cloth with a drop of washing-up liquid
to remove any dust or dirt from the case. Do no use stronger detergents or
solvents as these may damage the paint finish.
Using a dry 1" (25 mm) paint-brush, remove any dust from the grilles.
If the mains lead is damaged, it must be replaced by the manufacturer or
•
and authorised service centre. If the mains plug needs to be replaced,
proceed as follows:
When not in use, or during inclement weather, the black fabric dirt and dust
protector should be deployed. Always make sure that the heater is unplugged
and cannot be accidentally switched on when the dirt and dust protector is being
used.
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal
is free of charge to the end-user.
When replacing an existing appliance with a similar new appliance your retailer
may take the old appliance for disposal.
Dimensions:
Weight:
Power supply:
Power consumption:
Operating current:
IP Rating
MAINTENANCE
STORAGE
DISPOSAL AND RECYCLING
TECHNICAL SPECIFICATION
Connect the brown wire to the
•
terminal labelled "L".
Connect the blue wire to the terminal
•
labelled "N".
Connect the green/yellow wire to the
•
terminal labelled with the earth
symbol or "E".
Make sure that the cord-grip is
•
positioned correctly (over the outer
sheath of the cable) and it fully
tightened.
260×525×230 mm
1.98 kg
230 V ~
2000 W
8.7 A
IPX4
5