Video Setup - Philips HTS3172/98 User Manual

Video setup

Video Setup
TV System
TV Display
Picture Setting
Progressive
1
Press SETUP .
» [General Setup] menu is displayed.
2
to select [Video Setup] , then
Press
press .
3
Select an option, then press OK
4
Select a setting, then press OK .
• To return to the previous menu,
BACK .
press
• To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
• [PAL] – For PAL-system TV.
[NTSC] – For NTSC-system TV.
•
[Multi] – For TV that is compatible with
•
both PAL and NTSC.
30 EN
[TV Display]
Selects one of the following display formats:
•
•
•
[Picture Setting]
Selects a predefi ned set of picture color
settings or customize the personal setting.
•
•
•
•
SETUP .
[Progressive]
If the TV supports progressive scan output,
you can turn on the progressive scan mode to
enhance the picture quality. Video connection
through Component Video is required.
•
•
•
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
[4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
[4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
[16:9 Wide Screen] – For wide-screen
TV: display ratio 16:9.
[Standard] – Original color setting.
[Bright] – Vibrant color setting.
[Soft] – Warm color setting.
[Personal] – Customizes the color setting.
Set the level of brightness, contrast,
sharpness/tint and color saturation, then
press OK .
[On] – Turns on progressive scan mode.
[Off] – Disables progressive scan mode.
Tip
There is more detailed description available
(see 'Get started' > 'Turn on Progressive
Scan').
16:9 (Wide Screen)