Network Settings - PURE Evoke Flow Manual

Network settings

Tap Options from either Pure Connect or Media player, then select Network settings to view options for
configuring your network connection.
Connection wizard
Scan for wireless networks to connect to.
View details
Displays your wireless network configuration details.
Network name (SSID)
Encryption method (WEP, WPA or WPA2)
IP address
Network mask
DNS IP address
Router IP address
Radio MAC address
Access point MAC address
Manual setup
Manually configure your wireless network settings (for advanced users only).
Retry connection: Attempts to reconnect to the selected network.
Network name: Scan for networks or Enter SSID manually to specify a new SSID for your wireless
network.
Encryption mode: Change the encryption mode between WEP, WPA (PSK), WPA2 (PSK) or None.
Evoke Flow automatically detects the mode for your network. Only change this setting if you think the
encryption mode is incorrect.
Key or password: Enter a new encryption key or password.
IP address: Choose between DHCP (dynamic) or Static.
Clear network settings
Evoke Flow will delete all previous Wi‑Fi connections, passwords and settings and perform a fresh scan for
available networks.
EN
15