Get Started; Prepare The Remote Control; Turn On; Set Up Wireless Connection Manually - Philips HSB4383/93 Quick Start Manual

Philips home theater hsb4383 dvd playback wireless subwoofer
Hide thumbs Also See for HSB4383/93:
Table of Contents

Advertisement

4 Get started

Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Prepare the remote control

Caution
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
Risk of decreased battery life! Never mix different
brands or types of batteries.
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
2
1
Open the battery compartment.
2
Insert two R03 or AAA batteries with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
16
EN
1
3

Turn on

1
Press
.
»
The unit switches to the last selected
source.
2
Wait for automatic setup of wireless
connection between the main unit and
subwoofer.
» [PAIRING] (pairing) fl ashes.
»
If the connection succeeds,
(pair OK) is displayed and the blue
indicator on the subwoofer lights up.
»
If the connection fails,
(pair fail) is displayed and the green
indicator on the subwoofer lights up.
»
If the wireless connection fails, set up
the connection manually.

Set up wireless connection manually

1
In Normal Standby mode (see "Adjust
Settings - General Setup - [Standby
Mode]"), press and hold
unit for 3 seconds.
» [PAIRING] (pairing) fl ashes.
2
Press and hold PAIR on the subwoofer for
3 seconds.
»
The blue and green indicators on the
subwoofer fl ash alternately.
»
If wireless connection succeeds,
OK] (pair OK) is displayed and the
blue indicators on the subwoofer lights
up.
3
Turn on the main unit again.
[PAIR OK]
[PAIR FAIL]
on the main
[PAIR

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents