Advertisement
S
ETTING THE
Y
our remote control is set to
work your TV and many
infrared remote (IR) control
VCRs, Cable TV Converter
Boxes, DVD players, Home
Satellite receivers, etc.
However, an easy one-time step
may be necessary before the
remote will work with your
accessory device.
To begin, try this initial check to
see if going on to the following
section is necessary.
BEGIN
1
Press the VCR or
ACC(essory) System button on
the TV remote for the desired
accessory device category.
Note: The ACC(essory) system
button contains product codes
for Cable TV Converters, DVD
players, and Satellite receivers.
2
Point the TV remote toward
the desired accessory device and
press the POWER button.
3
Does the remote turn the
accessory device ON?
IF YES,
and try other
STOP
function buttons on the TV
remote. If they also work the
accessory device, then the
remote is ready and no further
steps are needed.
If NO, continue...
First look up a THREE-DIGIT
1
remote code number for your
brand of Accessory Device before
going through the simple Direct
Access Method steps shown on
the following page.
Find your Three Digit Code
Number on pages 45-46.
S
H
MART
ELP
Remember, if more than
one number is listed, you
may have to try more than the first
three-digit code given in order to
locate your device's correct code.
TV R
EMOTE TO
VCR
SATELLITE
RECEIVER
CABLE CONVERTER
42
W
A
ORK
CCESSORY
TV REMOTE
VCR/ACCESSORY
SYSTEM BUTTONS
TV
VCR
ACC
SWAP
PIP CH
SOURCE FREEZE
DN
UP
SMART
SLEEP
2
D
EVICES
1
Advertisement
